|
Dust Removal
Performance Over Time
CDCLarue dust
removal performance stays
constant over
time unlike other manufacturers
While
other vacuum equipment loose lift and C.F.M. during use,
Pulse-Bac®
vacuums do not. In independent test conducted by an outside
3rd party, CDCLarue dust vacuums maintain both lift and C.F.M. from start to finish with no change, no other vacuum
equipment tested was able to do the same. No shakers to stop
and shake, no compressors blowing back dust and shutting off
the vacuum, with Pulse-Bac Technology we only use ambient
air and vacuum to internally flush filters clear. The only
vacuum that delivers non-stop vacuum power.
 |
The
Pulse-Bac 2150 is ideal for vacuuming up fine powders like powder coat, concrete, wood, asbestos,
fiberglass, drywall and any other non-combustible dry material.
Our
patented filtration system is able to maintain lift and suction
from start to finish. Unlike today's standard vacuums that begin to loose suction once the filter becomes faced with
debris, CDCLarue Pulse-Bac vacuums automatically and
continually flushes dust and debris
off the filter while you work, preventing them from ever becoming faced with
debris and clogging.
This exclusive technology
allows air to move continually through the vacuum thereby preventing
the loss of lift and CFM. This
profound design
increases productivity, maximizes uptime, lowers maintenance cost, and increases filter life.
Pulse-Bac Technology works by flushing the filters clear
every 15 seconds using only ambient air and vacuum, no
blowers, compressors, shakers or buttons to push. Just turn
it on and automatically the vacuum does the rest.
Guaranteed!
 |
|
 Tank
Capacity Sensor
CDCLarue is the first in the industry to offer
TCS™ Equipment, standard on all PB-2000 Series, TCS is a
tank sensor located inside the upper collection chamber.
This sensor warns the user via audible alarm and a flashing
LED when debris inside the collection chamber has
reached a pre-determined amount. If the user fails to discard the dust or debris in a timely manner, the
sensor will automatically shut off the vacuum,
preventing the tank from being over filled, and there by
stopping damage to the filters and internal components. |
