|
The
Pulse-Bac 1050 is ideal for vacuuming up fine powders like powder coat, concrete, wood, asbestos,
fiberglass, drywall, terrazzo and any other non-combustible dry material.
Our
patented filtration system is able to maintain lift and suction
from start to finish. Unlike today's standard vacuums that begin to loose suction once the filter becomes faced with
debris, CDCLarue Pulse-Bac vacuums automatically and
continually flushes dust and debris
off the filter while you work, preventing them from ever becoming faced with
debris and clogging.
This exclusive technology
allows air to move continually through the vacuum thereby preventing
the loss of lift and CFM. This
profound design
increases productivity, maximizes uptime, lowers maintenance cost, and increases filter life.
Pulse-Bac Technology works by flushing the filters clear
every 15 seconds using only ambient air and vacuum, no
blowers, compressors, shakers or buttons to push. Just turn
it on and automatically the vacuum does the rest.
Guaranteed!
 Tank
Capacity Sensor
CDCLarue is the first in the industry to offer TCS™ Equipment, TCS is an optional
tank sensor tha t is located inside the vacuum tank. This sensor warns the
user via audible alarm and a flashing LED when debris inside
the collection tank has
reached a pre-determined amount. If the user
fails to discard the dust or debris in a timely manner, the
sensor will automatically shut off the vacuum,
preventing the tank from being over filled, and there by
stopping damage to the filters and internal components. |
|
Dust Removal
Performance Over Time
CDCLarue dust
removal performance stays
constant over
time unlike other manufacturers
After three hours of collecting dust
and debris from a High RPM 7"
Hum-B edge grinder, grinding on a
concrete floor, the PB-1050 experienced no loss of C.F.M.
while maintaining sealed lift. Our exclusive Pulse-Bac
Technology maintained 139 CFM from start to finish with 85"
of sealed lift; as measured from the end of a 25' vacuum
hose.
|
