|
The PB-575
vacuum can be used for
general jobsite clean up but is designed to collect, capture and
control dust and debris generated by hand held power tools used
to cut, grind or sand.
Winner of the
2010 World of Concrete Most Innovative Product Award, the Pulse-Bac®
PB-575 weighs in at 30 lbs, stands just 25” tall and is 16” in
diameter. This industrial grade lightweight portable Hepa vacuum
is capable of generating over 140 cubic feet per minute of air
flow, with 87” of lift.
Our
patented
Pulse-Bac® Technology automatically flushes filters clear of
dust and debris, allowing the
PB-575 to work
for long extended periods of time without ever clogging the
filters! No shop vacuum can do that. This exclusive technology
results in increased productivity while providing for a healthy
and clean working environment.
The PB-575
advanced filter filtration system uses Hepa H-13
filters, capable of capturing dust particles .3 micron
in size. Our easy to install twist on
Hepa rated H-13 filters eliminate 98.97% of dust particles
@.3 micron at a flow rate of 124 cubic feet per minute. The
PB-575 is not Hepa Certified, for Hepa Certified vacuums check
out the PB-550 or
the
PB-565
The PB-575 will not only keep you in compliance
with O.S.H.A. rules when working with Silca, drywall and wood,
but the patented Pulse-Bac technology will decrease your filter
replacement cost and allow you to work until the job is done,
without ever stopping to unclog or maintenance filters
|
Literature
Request
Weighing less
than 30 lbs and capable of holding up to 8 gallons of dust, the
PB-575 can easily be moved from work truck to jobsite and back
again. The easy to use pull handle allows you to tip the PB-575
backwards and pull it across any terrain, and when not being
moved sits securely in place.
Operating on any
standard 110 volt outlet, the PB-575 is designed and
manufactured to U.L. specifications and is backed up by a one
year limited warranty.
Pulse-Bac® Eliminates Hidden Cost!
-
Powered
by
Pulse-Bac®
Technology.
-
CDM™ Equipped - Cyclonic
Debris Management System reduces filter exposure to dust and
debris.
-
Two Twist on/off Hepa Rated H-13
P.T.F.E. Coated Spun Bond Polyester filters that lasts 10x
longer than conventional filters. Captures dust particles to .3
micron.
-
A vacuum motor capable of generating
140 CFM (air flow) with 87 inches of lift (suction).
-
15' x 1.5" self locking crush proof
vacuum hose.
-
One year limited warranty.
|
