The PB-550 is a Hepa Certified vacuum that can be used for general jobsite clean up but is designed to collect, capture and control dust and debris generated by hand held power tools used to cut, grind or sand.

Winner of the 2010 World of Concrete Most Innovative Product Award, the Pulse-Bac® PB-550 weighs in at 30 lbs, stands just 25” tall and is 16” in diameter. This industrial grade lightweight portable Hepa vacuum is capable of generating over 124 cubic feet per minute of air flow, with 87” of lift.

Our patented Pulse-Bac® Technology automatically flushes filters clear of dust and debris, allowing the

PB-550 to work for long extended periods of time without ever clogging the filters! No shop vacuum can do that. This exclusive technology results in increased productivity while providing for a healthy and clean working environment.

The PB-550 advanced filter filtration system uses a dual stage Hepa filtration process that puts you in compliance with the new 2010 EPA RRP Rules when working with hazardous materials like Lead Paint, Asbestos and Concrete.

The first stage of filtration uses our easy to install twist on Hepa rated H-13 filters. The 2^nd stage filtration uses a pre-installed Hepa certified IEST RP-CC001.4 filter that has undergone testing and is serialized, labeled and certified to eliminate 99.97% of dust particles @.3 micron at a flow rate of 124 cubic feet per minute.

The PB-550 will not only keep you in compliance with new E.P.A. mandates, but the patented Pulse-Bac technology will decrease your Hepa filter replacement cost and allow you to work until the job is done, without ever stopping to unclog or maintenance filters

Literature Request

Weighing less than 30 lbs and capable of holding up to 8 gallons of dust, the PB-550 can easily be moved from work truck to jobsite and back again. The easy to use pull handle allows you to tip the PB-550 backwards and pull it across any terrain, and when not being moved sits securely in place.

Operating on any standard 110 volt outlet, the PB-550 is designed and manufactured to U.L. specifications and is backed up by a one year limited warranty.

Pulse-Bac® Eliminates 99% of Hidden Cost!

Don't need a Hepa Certified vacuum, check out the

PB-575 ,a Hepa H-13 rated dust vacuum. Capable of capturing 98.97% of dust particles at .3 micron.

•  Powered by Pulse-Bac® Technology.

• CDM™ Equipped - Cyclonic Debris Management  System reduces filter exposure to dust and debris.

• Two Twist on/off Hepa Rated H-13 P.T.F.E. Coated Spun Bond Polyester filters that lasts 10x longer than conventional filters. and one industrial rated Hepa IEST RP-CC001.4 Filter that captures dust particles to .3 micron.

• All metal parts are galvanized or powder coated to withstand even the harshest environments.

• 15' x 1.5" self locking crush proof vacuum hose.

• One year limited warranty. 

After 3 hours of collecting dust and debris from a High RPM 7" Hum-B edge grinder, grinding on a concrete floor, the PB-550 experienced no loss of C.F.M. while maintaining sealed lift. Our exclusive Pulse-Bac Technology maintained 123 CFM from start to finish with 85" of sealed lift; as measured from the end of a 15' vacuum hose.

                                          Literature Request:        Vacuum Accessories